Toggle switch using integrated circuit technology and SMT surface equipment and manufacturing a new generation of photoelectric switch equipment, with delay, broadening, external synchronization, anti-interference, high reliability, work area stability and self-diagnosis and other intelligent functions. This kind of novel photoelectric switch is an electromechanical detection system type electronic switch with pulse modulation. The cold light source is infrared light, red light, green light and blue light. It can be non-touch, Control the various solid, liquid, transparent body, black body, soft body and smoke and other substances in the situation and action. Driving waterproof explosion-proof switch Touch-type limit switch has a low speed, poor precision, touch detection is a simple damage to the detected object and short life defects, and the transistor proximity switch effect interval is short, can not directly detect non-metallic data. But the new photoelectric switch is to overcome the above shortcomings, and small size, multi-function, long life, high precision, fast response, detection interval and anti-light, electricity, magnetic interference ability.
Toggle switch series, photoelectric switch can be used for a variety of applications, to avoid strong light source, photoelectric switch in the ambient illumination is high, usually can work steadily. But should avoid the sensor optical axis is on the sun, incandescent and other strong light source. Can not change the sensor (receiver) optical axis and strong light source point of view, the sensor can be installed near the top of the shade or put on the shade tube. To avoid mutual interference, MGK series of new photoelectric switch usually have the initiative to avoid mutual interference function, so do not worry about mutual interference. However, the HGK series of radio-type infrared photoelectric switch in several groups side by side near the equipment, you should avoid the neighbors and mutual interference. The easiest way to avoid this interference is to set the diffuser and the receiver interchanging, and to pull the group distance across the two groups. Of course, the use of different frequency models is also a good way.
The toggle switch power supply is a power supply that uses modern power electronics skills to control the switching time of the switch tube and shuts off, and maintains a stable output voltage. The switching power supply is usually composed of pulse width modulation (PWM control IC and MOSFET). Switching power supply and linear Power supply comparison, the two interest are followed by the addition of the output power to add, but the two add different rates. Linear power costs in an output power point, but higher than the switching power supply, which is called the cost of turning point. Power electronic skills to open and innovation, making the switching power supply skills are also from time to time innovation, the interest point of the increasingly moving to the low output power side, which for the switching power supply provides a broad open space.
Toggle the switch concept
The toggle switch power supply is a power supply that uses modern power electronics skills to control the switching time of the switch tube and shuts off, and maintains a stable output voltage. The switching power supply is usually composed of pulse width modulation (PWM control IC and MOSFET). Switching power supply and linear Power supply comparison, the two interest are followed by the addition of the output power to add, but the two add different rates. Linear power costs in an output power point, but higher than the switching power supply, which is called the cost of turning point. Power electronic skills to open and innovation, making the switching power supply skills are also from time to time innovation, the interest point of the increasingly moving to the low output power side, which for the switching power supply provides a broad open space.